info@comfytouch.cn

Home   |   Mattress Toppers

Mattress Toppers

Graphene Graphite Mattress Topper – Quilted Cotton OEM & ODM

  • >Face: 100% cotton woven, quilted in a box pattern and approved on a strike-off before cutting
  • >Reverse: Dotted grip fabric that holds the pad on the mattress, approved with the face on the same sample
  • >Filling: Graphene graphite as declared on the source listing; fill weight confirmed against the batch test report on request or with the sample
  • >Order terms: MOQ 100 pieces per size (unit confirmed at quotation), custom size, 31-day lead time
  • Product description: Graphene graphite mattress topper with a 100% cotton quilted face and a dotted grip reverse, made to your size. MOQ 100 pieces per size, OEM packing.
  • INQUIRY

A graphene graphite mattress topper is a quilted pad that goes on top of an existing mattress. It changes the surface a buyer sleeps on without replacing the mattress, so hotel programmes, importers and hospital suppliers order it as a separate line.

This page covers a topper with a 100% cotton quilted face, a dotted reverse and a graphene graphite fill, made to your own size in our workshop. We are Comfytouch, a bedding factory in Hefei, Anhui, China, and quilting, filling and packing run in-house.

Dotted reverse fabric of the quilted mattress topper

What is a graphene graphite mattress topper and who buys it?

The construction is simple to describe and hard to get right in bulk. A woven cotton face is quilted in a box pattern to a layer of graphene graphite fill, and a dotted fabric is used on the reverse so the pad grips the mattress instead of sliding during the night. The quilting holds the fill in place, so the surface stays level across the bed rather than drifting into one corner.

It suits three kinds of buyer. A hotel or serviced-apartment programme buys it to lift the feel of an existing mattress stock without a full replacement cycle. An importer buys it as a standalone carton line that ships flat and folds for retail. A hospital or care supplier buys it where a replaceable top layer is easier to manage than the mattress.

How is the topper built?

The quilted face

The face is a 100% cotton woven fabric, quilted in a box pattern over the fill. Cotton is specified because it takes quilting tension evenly and holds the pattern after laundering. The face is approved on a strike-off before cutting, so the pattern, the stitch density and the shade are signed off on cloth rather than on a screen.

The dotted reverse

The reverse carries a raised dot pattern, which is what stops the topper walking across the mattress overnight. Because the dots are a surface effect rather than a coating, they are judged by touch and by how they behave after washing, so the reverse is approved together with the face on the same sample.

Specifications

ProductQuilted graphene graphite mattress topper
Face100% cotton, quilted box pattern
ReverseDotted grip fabric
FillingGraphene graphite as declared on the source listing; other fills quoted to your specification
Yarn count40s, as declared on the source listing
ConstructionQuilted, folds flat for packing
ColourWhite as standard; other shades quoted to your specification
SizeCustom size; confirmed at quotation
MOQ100 pieces per size (unit confirmed at quotation)
Packing60 x 60 x 30 cm carton, 10 kg gross
Lead time31 days from order approval
CertificationOEKO-TEX Standard 100 No. 21.HCN.83824 | ISO 9001:2015 No. ECI22Q00239R1S | ISO 14001:2015 No. ECI22E00129R1S | BSCI copy on request

What are the order terms?

The order runs from MOQ 100 pieces per size (unit confirmed at quotation), because the quilting line is set up per size. Size itself is confirmed at quotation: the source listing sells a custom size rather than a fixed chart, so we agree the dimensions with you.

Lead time is 31 days from order approval, and packing is one 60 x 60 x 30 cm carton at 10 kg gross. Fill weight is confirmed against the batch test report on request or with the sample, because fill weight is set per size and per target hand rather than fixed across a range.

OEM and ODM work covers size, quilting pattern, label, carton print and barcode. Buyers comparing this against a down-filled pad start from the wholesale mattress topper range, and the rest of the constructions sit on the product catalogue page.

Certification

The topper is produced under OEKO-TEX Standard 100, ISO 9001:2015 and ISO 14001:2015, with a BSCI audit copy on request. Certificate numbers, scope and validity dates are listed on our certificates page. Before any claim goes onto your own packaging, the OEKO-TEX standards pages set out what each standard covers, and the ASTM test standards explain how textile performance claims are tested.

Frequently asked questions

Can the size be customised?

Yes. The source listing sells a custom size rather than a fixed chart, so send the dimensions you need and we will confirm the size set, the quilting layout and the carton count in the quotation.

Is the filling down?

No. The fill declared on the source listing is graphene graphite, and the face is cotton. Any other fill is quoted to your specification rather than assumed, and fill weight is confirmed against the batch test report on request or with the sample.

What is the MOQ?

MOQ is 100 pieces per size (unit confirmed at quotation). Sizes are quoted as separate runs because the quilting line is set up per size, so a two-size order is quoted as two size runs.

How is it packed, and how long is lead time?

Packing is one 60 x 60 x 30 cm carton at 10 kg gross, and lead time is 31 days from order approval. Carton marking and barcode are part of the OEM scope, so the carton can arrive ready to book in.

Send the size set, the quilting pattern you want and your target quantity to info@comfytouch.cn or +86 18156986179. Comfytouch will reply with a construction proposal, a free fabric swatch card and tiered bulk pricing for the quantities you are planning.

Inquiry

Email Email WhatsApp WhatsApp WeChat WeChat Phone Phone
close
Scan the qr codeClose
the qr code