Satin Bedding Set Manufacturer – Custom Hotel & Bulk Orders

Most satin bedding enquiries start with a material question, so it is worth answering it in the first line: this set is polyester satin. Satin is the weave that gives the face its sheen and drape; the fibre under it here is polyester filament. That is what makes a four-piece satin set work at volume, and why the care regime stays simple.

Buyers arrive for one of two reasons. A hotel or serviced apartment wants a bed that photographs well without moving an entire floor onto a delicate fibre. A retail brand wants the look at a price that still works after discounting. Both care about the same three things: how the surface survives handling, whether colour can be matched across reorders, and whether the size run fits the market.

We are Comfytouch (Anhui Comfytouch Ltd), a bedding manufacturer in Hefei; this page is written so you can specify the set before asking for a quotation.

Satin is a weave, not a fibre - and that changes what you buy

Satin describes how a cloth is built, not what it is made of. The warp floats over the weft, which is why the face reflects light and the back does not. Two sets can both be called satin and behave nothing alike, because the fibre decides the cost, the care and the failure mode.

That is why the fibre belongs in your purchase order, not just the word satin on a quotation. This set is polyester satin: polyester filament woven in a satin structure - a face with strong sheen and drape, a simple wash regime, and a cost position that holds up when a retail buyer needs margin.

Two consequences follow. Colour is easier to hold across reorders than in a fibre that shifts tone under washing. And the surface is the vulnerable part: a satin face shows a pulled thread more than a plain weave does, which is a handling question more than a laundry one.

What the surface actually is, and when custom graphic work pays

The set photographs as solid colour satin - silver grey in our current imagery - with same-tone sheen stripes running through the face. That is the appearance to approve against, because satin reads differently depending on how light hits the floats, and a stripe that looks crisp in a studio shot can flatten under hotel lighting.

If your market needs a graphic rather than a solid face, that is a customisation conversation rather than a catalogue variant: graphic work sits at the 500-piece tier, where the artwork is developed against your reference before the run. Solid colour at 100 pieces is the faster route.

We will not claim a durability figure we cannot show. Snag resistance, abrasion and colour retention are confirmed against the batch test report on request / with sample, for the construction and colour you order.

Colour matching across a reorder is the real spec

Satin is unforgiving about colour: the same dye lot reads differently at a seam because the floats catch light at different angles, and a sheen that looks right on a screen can arrive a shade off. That is why colour is taken from your requirement or the reference image on our listing, and why we ask for a physical standard when colour is critical.

For a programme, approve one physical reference once and keep it - a group approving per property will drift, and the drift shows in photographs long before it shows in a complaint.

Retention across repeated laundering is confirmed against the batch test report on request / with sample.

Sizes, piece count and the markets that ask for satin

Sizes are listed as Twin, Full, Queen, King and SUPER KING, with custom sizing on inquiry - US retail naming plus most export markets. Where your market uses metric dimensions, send those and the run is cut from them rather than from a label.

The set is a four-piece set. Our listing describes it as a bed sheet set with pillow cases, and the exact breakdown for your order is confirmed on the spec sheet - a four-piece configuration is not standardised across markets, and a buyer who assumes it is will find the second order short.

The channels that ask for satin most often are hotel and serviced apartment groups upgrading a room class, retail brands building a sheen story, and importers serving gifting seasons. Each wants a different size spread, so settle the run at the same time as the colour.

From a 100-piece trial to a 500-piece branded run

Minimum order quantity is 100 pieces for the standard set. Three customisation types each move that to 500 pieces: graphic customisation, customised packaging and customised logo. So the practical route is the 100-piece level in a plain construction, proved on real beds or in a retail test, then the 500-piece tier once the specification is settled.

Packing drives carton count, which drives freight - worth fixing in the same conversation as the specification rather than after the quotation is signed.

OEM and ODM work is accepted, so the set can carry your label, packing and artwork. Samples can be provided, and a satin sample does three jobs: sheen under your own lighting, colour against your physical reference, and the piece breakdown your market expects.

At a glance

Specifications

Frequently asked questions

Q1. What fibre is the set made from?

Polyester satin. Satin is the weave - the float structure that produces the sheen - and the fibre inside it is polyester filament. Fibre and weave are separate decisions, and both belong in a purchase order rather than one standing in for the other.

Q2. What are the four pieces?

Our listing describes the set as a bed sheet set with pillow cases, in a four-piece quantity. The exact breakdown for your order is confirmed on the spec sheet, because a four-piece configuration is not standardised across markets.

Q3. Is the surface solid colour or a graphic?

It is solid colour satin as photographed - silver grey in our current imagery, with same-tone sheen stripes in the face. If your market needs a graphic instead, customisation is available at the 500-piece tier, developed against your artwork before the run starts.

Q4. Which sizes can you supply?

Twin, Full, Queen, King and SUPER KING as listed, with custom sizing on inquiry. Send metric mattress dimensions where your market uses them and the run is cut from those numbers rather than from a size label.

Q5. What is the minimum order, and what moves it?

100 pieces for the standard set. Graphic customisation, customised packaging and customised logo each raise the minimum to 500 pieces, which is why a first order is usually taken at the 100-piece level before branding is committed.

Q6. Can you match a specific colour, and how durable is it?

Colour is produced to your requirement; for anything critical send a physical reference rather than a screen image, because satin sheen changes how a shade reads. Retention across repeated washing is confirmed against the batch test report on request / with sample.