info@comfytouch.cn

Home   |   Duvets

Duvets

Printed Sherpa Fleece Duvet – 100% Polyester OEM & ODM

  • >Face: 100% polyester, printed to your artwork, approved on a strike-off before cutting
  • >Reverse: Fleece for a winter hand, approved together with the print on the same sample
  • >Filling: 100% polyester fibre as standard; other fills quoted to your specification
  • >Order terms: MOQ 100 pieces (unit confirmed at quotation), size set confirmed at quotation, 31-day lead time
  • Product description: Printed sherpa fleece duvet with a polyester face, fleece reverse and polyester fibre fill, stitched and packed per carton. MOQ 100 pieces, OEM print.
  • INQUIRY

A sherpa fleece duvet is a winter duvet with a printed face and a fleece reverse, and buyers ask for one for a practical reason: it puts a warm-feeling winter layer into a range at a price band a woven comforter cannot reach. This page covers a printed sherpa fleece duvet with a 100% polyester face, a fleece reverse and a polyester fibre fill, stitched in our own workshop and made to your size and print.

We are Comfytouch, a bedding factory in Hefei, Anhui, China. Printing, filling, stitching and packing run in-house, so a seasonal print repeat goes back to the same line.

Printed sherpa fleece duvet modelled with the fleece reverse showing at the turn-down

What is a sherpa fleece duvet and who buys it?

The construction is straightforward: a printed polyester face on one side, a fleece reverse on the other, and a polyester fibre fill between them, held by stitching. The fleece gives the duvet its winter hand, and the print is what lets a brand carry a seasonal story without changing the construction underneath.

It suits three kinds of buyer: a retail or marketplace brand running a winter print story, a distributor that needs a warm-feeling duvet at a value band, and a hotel or rental programme that wants a winter layer for colder rooms.

What does the print and the fleece change in production?

Where the print sits in the process

Print is applied to the face fabric before the duvet is filled, so the print repeat, the colour and the hand of the face all have to be approved on a strike-off before cutting. A buyer who changes artwork after the filling is approved restarts the sequence, which is why we ask for the print file with the first enquiry.

Why the fleece reverse needs its own approval

A fleece reverse is judged by touch and by how it behaves after laundering, not by a photograph. We approve the reverse pile on a sample together with the print, because the two surfaces age differently.

Specifications

ProductPrinted sherpa fleece duvet
Face100% polyester, printed
ReverseFleece
Filling100% polyester fibre; other fills quoted to your specification
ConstructionStitching
SizeConfirmed at quotation; the source listing ships a single Queen SKU
MOQ100 pieces (unit confirmed at quotation)
Packing60 x 60 x 30 cm carton, 5.0 kg gross
Lead time31 days from order approval
CertificationOEKO-TEX Standard 100 No. 21.HCN.83824 | ISO 9001:2015 No. ECI22Q00239R1S | ISO 14001:2015 No. ECI22E00129R1S | BSCI copy on request

What are the order terms?

The order runs from MOQ 100 pieces (unit confirmed at quotation), because the attribute record on the source listing carries both a set figure and a piece figure. Size is agreed at quotation for the same reason: the listing names a size range but ships a single Queen SKU, so we confirm the size set with you rather than publish a list. Lead time is 31 days from approval, and packing is one 60 x 60 x 30 cm carton at 5.0 kg gross.

Fill is 100% polyester fibre as standard. Other fills are quoted to your specification rather than assumed, and fill weight is confirmed against the batch test report on request or with the sample.

OEM and ODM work covers print artwork, size set, label, carton print and barcode. Buyers comparing this against a woven-shell product usually start from the microfiber comforter range, buyers changing only the outer layer start from duvet covers, and the rest of the constructions sit on the duvets category page.

Certification

The duvet is produced under OEKO-TEX Standard 100, ISO 9001:2015 and ISO 14001:2015, with a BSCI audit copy on request. Before any claim goes onto your own packaging, the OEKO-TEX standards pages set out what each standard covers, and the ASTM test standards explain how textile performance claims are tested.

Frequently asked questions

Can the print be customised?

Yes. Send the artwork file with the first enquiry and we will quote the print repeat and the colour against your file. The print is approved on a strike-off before cutting, so a late artwork change costs a production cycle.

Is the filling down?

No. The standard fill is 100% polyester fibre. The source listing records a list of possible fill materials, so any fill outside polyester is quoted to your specification rather than assumed, and fill weight is confirmed against the batch test report on request or with the sample.

What size can I order?

The size set is confirmed at quotation. The listing names a size range but ships a single Queen SKU, so we agree the sizes you actually need rather than quote from a list that would not match every order.

How is it packed, and how long is lead time?

Packing is one 60 x 60 x 30 cm carton at 5.0 kg gross, and lead time is 31 days from order approval. Carton marking and barcode are part of the OEM scope, so the carton can arrive ready to book in.

Send the print file, the size set and your target quantity to info@comfytouch.cn or +86 18156986179. Comfytouch will reply with a construction proposal, a free fabric swatch card and tiered bulk pricing for the quantities you are planning.

Inquiry

Email Email WhatsApp WhatsApp WeChat WeChat Phone Phone
close
Scan the qr codeClose
the qr code