Down Pillows
Neck Support Down Pillow – 300TC Cotton Cover OEM
- >Cover: 100% cotton at 300 thread count, fabric count 60, with the shell finishing confirmed on your sample
- >Filling: Down, with fill weight, loft and blend confirmed against the batch test report on request or with the sample
- >Neck section: Cut to your drawing or approved sample, with the profile finalised at sampling rather than fixed in advance
- >Order terms: MOQ 100 sets, OEM and ODM labelling, and a physical sample approved before the bulk run
- Product description: Neck support down pillow with a 100% cotton 300 thread count cover and a neck section built to your drawing. MOQ 100 sets, OEM labels, sample first.
Pillow height is the part of a hotel spec that gets argued about after the first guest complaints, and it is the one part a rectangular pillow cannot fix. This page covers a pillow built for that gap: a neck support down pillow with a separate neck section, a 100% cotton cover at 300 thread count, and a fill your buyer specifies rather than ours.
We are Comfytouch, a bedding factory in Hefei, Anhui, China. Down filling, ticking, sewing and packing run in our own workshop, so a change to the neck section goes to the production floor rather than a trading desk. The pillow is quoted by set from 100 sets, and every buyer approves a sample before the bulk run.

Where a neck section fits in a hotel pillow programme
A neck section is a raised band of filling along one edge of the pillow. On a side sleeper it closes the gap between the shoulder and the head; on a back sleeper it sits under the curve of the neck without lifting the crown. That is why the shape is cut to a drawing rather than bought off a shelf.
What it changes for the room
A rectangular pillow asks the guest to fold, punch or stack it to find height. A pillow with a neck section presents the height where the neck actually rests. The room standard stays consistent from floor to floor.
What we need before sampling
Three things: the neck profile you want (a drawing, a photo of a pillow you already sell, or a sample by post), the cover you want it in, and the fill target. Fill weight and loft for your order are confirmed against the batch test report, on request or with the sample.
The cover: 100% cotton at 300 thread count
The cover is 100% cotton at 300 thread count, fabric count 60. Thread count sets how dense the cloth feels against the face; fabric count sets the yarn it was woven from. Both are on the specification table below, and both are worth asking about.
Down migrates through an open weave, which is why the ticking is judged by the same test as the filling: run a hand across the surface, look for quills working through, then ask what the shell is and how the seams are closed. Ours is a cotton shell at the count above; the finishing spec is confirmed on your sample.
Specifications
| Item | Specification |
|---|---|
| Product | Neck support down pillow, neck section to your drawing |
| Filling | Down; fill weight, loft and blend confirmed against the batch test report, on request or with the sample |
| Cover | 100% cotton, 300 thread count, fabric count 60 |
| Neck section | Cut to your drawing or approved sample; profile confirmed at sampling |
| Net weight | 1 to 1.5 kg per unit |
| Packing | Carton 60 x 60 x 30 cm, gross weight 5.0 kg per carton |
| MOQ | 100 sets |
| Customisation | OEM and ODM: cover, size, label, carton printing, barcode |
| Certification | OEKO-TEX Standard 100 No. 21.HCN.83824 | ISO 9001:2015 No. ECI22Q00239R1S | ISO 14001:2015 No. ECI22E00129R1S | BSCI copy on request |
Order terms: MOQ, sampling and OEM labelling
The order runs by set from 100 sets. Sampling comes first, because height on paper and height under a head are different things. The approved sample becomes the production reference for the bulk run.
OEM and ODM cover the cover fabric, label, carton print and barcode, so the pillow arrives at your warehouse ready to book in. Buyers who also stock a synthetic line run the same programme on our microfiber pillow range. Those comparing constructions usually start from our goose and duck down pillows and then narrow down to this neck section shape.
Certification
The pillow is produced under OEKO-TEX Standard 100, ISO 9001:2015 and ISO 14001:2015, with a BSCI audit copy on request. If you need to check what each standard covers before a claim goes on your own packaging, the OEKO-TEX standards pages and the IDFL testing notes are the two references we point buyers to.
Frequently asked questions
Can the neck section be changed for our market?
Yes. It is cut to your drawing or to a pillow you already sell, so the profile is decided at sampling.
Which down species is used, and what fill weight?
The source listing specifies down filling and does not separate the species, so species, blend and fill weight are confirmed against the batch test report for your order. Tell us what your market expects and we will quote against it.
What thread count is the cover?
300 thread count, 100% cotton, fabric count 60. A different shell can be quoted on request.
How many pieces do we have to order?
100 sets. The order is quoted and packed by set.
Do you supply the standard down pillow line as well?
We do. The neck support shape sits alongside our down pillow manufacturing line, so one project can mix a flat pillow and a neck support pillow.
Send the neck profile, the cover you want and your target quantity to info@comfytouch.cn or +86 18156986179, and we will reply with a construction proposal and a sampling plan.
Inquiry
Latest News
- Comfytouch at the 140th Canton Fai2026-10-09
- Comfytouch Bedding Heads to EQUIPO2026-09-02
- Heimtextil 20262026-01-14
- Join us in Frankfurt {13 to 16 Jan2025-11-11
- The 138 th canton fair in guanzhou2025-11-11


